6 Common Causes Of Low Water Pressure

Are you having problems with water pressure and looking for a replacement of the water pressure regulator? This situation can be frustrating sometimes. Does your bathtub take ages to fill up? It becomes pressurized before the water enters your property and is relieved from the tap! This pressure allows the water to flow through the plumbing network. If you are receiving water from the local supply, then the water is pressurized through the nearest water tower. But what if you are receiving water from the private supply? In this situation, the water is pressurized through a suitable pressure tank. The goal of this tank is to add pressure to the water so that it can move through the plumbing lines.

Low water pressure can bring a wide range of issues to your property. It can take a dangerous look when you ignore this situation for a long time. Man problems can occur because of the low water pressure, and to learn those causes, you should move to the next section. Some causes can be fixed by you, and some are not! You can’t handle these situations, and it always needs a professional for water pressure regulator replacement who can diagnose the condition and recover from it.

Major Causes Of Low Water Pressure

A Damaged Pressure Regulator:

A faulty or damaged pressure regulator can bring the biggest impact on the fixture of your home. A damaged regulator can bring the water pressure too low, or either it can speed up the process. If you have installed a water pressure regulator in your home, then it’s essential to ensure that the pressure of the water should be at the right level. If it’s not, it can damage the plumbing system. Therefore, if you have noticed a damaged or broken pressure regulator on your property, then call a plumber immediately. To avoid such damages, you should track the maintenance and replace it when required.

Is There Any Leak? :

Do you know that leaks can also affect the water pressure and flow of the water? If you notice a rapid depreciation in the water pressure, you might have a leakage anywhere around your property. Check all the pipes which you have installed at your home. In most scenarios, you can easily spot the issue, but you can call water pressure regulator repair professionals if you can’t locate the problem. With their help, you can also detect concealed leaks underground. They will help overcome this scenario and repair it to turn the water pressure level to normal.

Clogged Pipes:

It is another common cause that might affect the water pressure level. Sometimes when you open the faucets, the water level may start at the normal pressure, but suddenly, it drops down. Have you noticed the same issues? If you had, it is due to the clogged pipe. When there is a lot of debris and dust that blocks the pipe, clogging issues occur, creating difficulties in the water flow system. If you suspect any clogged pipe in your home, it is best to hire the experts for water pressure regulator repair. When you call them, they will come to your space by bringing all the necessary tools and try to fix the pipes. Don’t leave this situation as it is; otherwise, you will suffer the damages you have never dreamed of.

Are You Using Multiple Faucets:

Do you have various water outlets at your property? Having multiple facets and showers simultaneously can also bring down the water level. When you use multiple water outlets rapidly, it will reduce the water pressure of water. Anyone can solve this problem by themselves by using one to 2 water outlets at a single time.

Shut Off Valves:

The main goal of shut-off valves is to control the water flow into the water fixtures and residential properties. If the shut-off valves in your property are in close mode, you should open them up all the time. Otherwise, it can slow down the water flow process and reduce the water pressure level. If you have this issue, you can fix the issue by just adjusting the valves. During this process, if you find any damage in the valve, you should move to replace it.

Corrosion:

Do you know how old your plumbing system is? When the plumbing system becomes older, it will start corrosion. But unfortunately, these corrosions are not always flushed via the system. As a landlord, you should know that the maximum lifespan of the water pipes is 20 years. So, if you have any installed pipe present there on your property for more than 20 years, you may need the help of water pressure regulator experts in San Diego. When they reach your space, they will replace the corroded pipes and make every possible change to bring the water pressure level back to normal.

Are you going through any kind of this situation on your property? If you are, you should learn the ideas to recover from them. In the initial stage, you should try to recover from this yourself. But if you cannot achieve effective outcomes, you can hire an expert. We mentioned a few steps to increase your water pressure level in the below steps.

Steps To Recover From Low Water Pressure:

Are you finding ways to troubleshoot the water pressure level? Troubleshoot will minimize the issue of low water pressure. If you want to increase the water pressure and improve the water flow, here are the below options. Starting and ending a day with a weak shower can deeply frustrate you. If you don’t want to live with poor water pressure, you should ask the help of water pressure regulator experts in San Diego.

Contact The Neighbors:

You should contact the neighbors first in the initial stage. If they are experiencing something similar problem, then it’s common for you.

Check Your Good Pump:

In the next step, check your good pump. Some properties receive water from the municipal water supply. The cause of the water pressure level might be the deep into the ground. Test the pressure yourself before calling the water pressure regulator experts in San Diego.

Clear The Clogs:

Over time, your pipe develops the buildup of minerals and clogs. This situation can be bad if you neglect it for a very long time. In extreme cases, the pipe diameter also decreases.

Open Your Main Water Valve:

In the next step, you should open the main water valve. Find the valve and check whether it is completely open or not. Opening a half-shut valve is a quick way to increase the water pressure.

Replace The Regulator:

You should replace the regulator and check if there is any leakage in the pipe. The cracked or damaged pipe is the biggest reason for water pressure minimization. To determine whether the pipe is damaged or not, you should ask the water valve experts.

If the above-discussed step is not working for you, you should hire an expert plumber for a water pressure regulator check-up.

Final Thoughts

A little investigation always helps you to recover from the biggest task. If you are also going through low water pressure issues, professional help is needed. With their help, you can improve house water pressure no matter the situation; visit EZ plumbing USA if you want free consultation with the expert.

Share This Article

Marketing Manager
About:
Angela is a marketing manager at EZ Plumbing USA. She has a great interest in educating readers about various leakages that can happen in their home or offices through her articles. With extensive knowledge of water leak and slab leak detection techniques as well as HVAC systems, Angela wants to make readers aware about the warning signs indicating leakage and predictive AC and Heater maintenance and also how to fix them to refrain from dangerous and costly consequences.

Read articles to get more valuable information about detection and damages of water and slab leak repair, techniques to fix clogging, and installation and maintenance of AC & Appliance in San Diego.